Electrical & A/C Professional Services
Experience reliable electrical and air conditioning services that ensure your property remains fully operational and your investment continues to thrive.
Replacing your old HVAC system can increase the value of your home dramatically and save you a fortune in utility bills and unexpected repair costs. At A&A Remodeling we have the right solution for that problem.
Professional A/C Service
Our results speak for ourselves. We at R&R Remodeling always deliver the most brilliant colors.
Expert Electrical Installation
We offer professional services from fixing wall contacts to new property electric installation
Residential & Commercial
We provide installation services to Central Air, wall/window-mounted and Mini Splits A/C Systems
Electric Boxes Replaced
We do services from switching fuses to whole electric panel boxes replacements
Our skilled team is dedicated to providing timely and clean solutions, so your systems keep running smoothly and efficiently.
Key Electrical & A/C Facts and Considerations
Electrical
Safety first
-
Always prioritize safety when dealing with electricity.
-
Turn off the power to the circuit you plan to work on by flipping the circuit breaker in your electrical panel.
-
Use a voltage tester to confirm that the power is indeed off before touching any wires.
-
Wear appropriate protective gear, such as safety goggles, gloves, and rubber-soled shoes.
-
Never overload outlets by plugging in too many appliances
-
Avoid using extension cords as a permanent solution and inspect them regularly for damage.
-
Keep electrical equipment away from water and use Ground Fault Circuit Interrupters (GFCIs) in wet or damp locations.
-
Consider installing Arc Fault Circuit Interrupters (AFCIs) to protect against electrical fires caused by faulty wiring or connections
The Electrical Panel Box
-
The electrical panel (or breaker box) is the central control point, distributing power through various circuits.
-
Circuit breakers protect circuits from overloads and short circuits by automatically shutting off power.
-
Branch circuits distribute power from the panel to different areas and appliances.
Air Conditioning
Choosing the right system
Types: Consider central AC, window units, portable units, mini-split systems, and geothermal options, each with pros and cons based on factors like home size, budget, ductwork presence, and desired features.
-
Central Air Conditioners: Efficient for whole-home cooling but have higher installation costs and require ductwork. They offer consistent cooling and improved indoor air quality.
-
Ductless Mini-Splits: Provide individual temperature control for rooms or zones, are energy efficient, and easy to install without ducts
-
Window and Portable Units: More affordable and flexible for single rooms or temporary cooling needs,
Proper sizing and installation
-
System Sizing: Matching the AC's cooling capacity (measured in BTUs) to the room or home's square footage is crucial for efficiency and comfort.
-
Professional Consultation: Seek guidance from an HVAC professional like A&A Remodeling to determine the ideal size, especially for unique features like high ceilings or ample sunlight.
-
Installation Matters: Proper installation maximizes energy efficiency, extends system life, protects warranties, ensures compliance with building codes, and improves indoor air quality.
Energy efficiency
-
SEER (Seasonal Energy Efficiency Ratio): Measures cooling efficiency over a typical cooling season; a higher SEER rating indicates greater efficiency and lower energy bills.
-
EER (Energy Efficiency Ratio): Measures efficiency at a specific outdoor temperature (95°F). Higher EER is beneficial in consistently hot climates.
-
Higher SEER/EER = Lower Bills: Units with higher efficiency ratings will generally consume less energy to produce the same amount of cooling, resulting in lower energy bills.
-
Consider Upgrading: Older units tend to be less efficient. Consider upgrading to a high-efficiency model with a SEER rating of 17 or higher for optimal long-term savings.
A/C FAQs
What is the 3 minute rule for air conditioners? The 3-minute rule for air conditioners refers to the guideline that you should wait at least three minutes after turning off your air conditioner before turning it back on. This delay allows the system's pressure to equalize, protecting the compressor and other components from damage caused by rapid cycling
What factors should I consider when buying an AC? When buying an AC, you should consider the room size, energy efficiency (SEER rating), cooling capacity, type (split or window), noise level, brand reputation, and additional features like programmable thermostats or air purifiers when buying an AC.
What's the 20 rule for air conditioning? In short, the 20-degree rule of air conditioning states that you should always keep your AC unit at no more than 20 degrees lower than the outside temperature. It means that, if the outdoor conditions are at 95 degrees, you should set your thermostat at no less than 75 degrees.
How long should an AC unit run per day? A typical air conditioning unit should run for 8-15 hours per day, cycling on and off to maintain the desired temperature. However, this can vary based on factors like outdoor temperature, unit size, and home insulation. It's normal for AC units to run for longer periods on extremely hot days
Electrical FAQs
What are the general rules for residential wiring work? Always check with the building department of your municipality before doing electrical work. All lighting must be on either a 15-amp or 20-amp circuit. The 15-amp circuits should use 14-gauge wire while 20-amp circuits should use 12-gauge wire.
What is the typical residential electrical service? The average home has between 100 and 200 amp residential service. It's essential to know the size of your house's electrical service to see if it needs to be updated or if it can handle upgrades to your home
Can I put lights and outlets on the same circuit? Yes, you can generally put lights and outlets on the same circuit in residential settings, as long as the total load doesn't exceed the circuit's capacity. However, there are some exceptions and considerations. While not always required, separating lighting and receptacle circuits can improve safety and prevent inconvenience
What are the three rules of electrical? Rule 1 – Electricity will always want to flow from a higher voltage to a lower voltage. Rule 2 – Electricity always has work that needs to be done. Rule 3 – Electricity always needs a path to travel
Get a Quote
This is a Paragraph. Click on "Edit Text" or double click on the text box to start editing the content.